UAP-AC-SHD Specifications:
802.11AC Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience.
MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement* overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.
4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
A 4x4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3x3 in both radio bands.
The UniFi AC SHD AP delivers unprecedented wireless awareness and security, including tools for real-time spectrum monitoring, airtime utilization analytics, and intrusion detection/prevention.
Dedicated Spectral Security Radio: Using a persistent spectral scan, the UniFi AC SHD AP constantly monitors the RF environment to check for both potential malicious activity and the best channel for network performance.
The dedicated security radio allows the UniFi AC SHD AP to scan for security threats, such as malicious frames and rogue access points, while maintaining throughput for client devices. At the same time, UniFi, in conjunction with the UniFi AC SHD AP, analyzes and displays the wireless spectrum and airtime utilization to allow the network admin to have unprecedented real-time visibility into the spectral and protocol usage in the network.
Threat Management: The UniFi AC SHD AP's dedicated security radio provides persistent threat management to act as a Wireless Intrusion Prevention System (WIPS) and Wireless Intrusion Detection System (WIDS). Such a dedicated radio affords frequency agility - meaning all available Wi-Fi channels are monitored constantly for threats - not just the channels the AP is using.
Spectrum and Wi-Fi Packet Analysis: The airView® tool offers real-time visibility into your RF spectrum. Because it uses the dedicated security radio, it analyzes all of your available RF channels without affecting performance or disrupting client activity. The airTime tool visualizes and analyzes how the APs use channels in real time. The breakdown is by frame type, clients, neighboring APs, protocols, and interference
TX Power for 2.4 GHz: 6-25 dBm
TX Power for 5 GHz: 6-25 dBm
Antennas for 2.4 GHz: (2) Dual-Port, Dual-Polarity Antennas, 6 dBi each
Antennas for 5 GHz: (2) Dual-Port, Dual-Polarity Antennas, 6 dBi each
Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w (PMF)
BSSID: Up to 8 per Radio
Networking Interface: (2) 10/100/1000 Ethernet Ports
Power Method: 802.3at PoE+
Supported Voltage Range: 44 to 57VDC
Power Supply: UniFi Switch (PoE)
Maximum Power Consumption: 20W
Power Save: Supported
Weight: 700 g (1.54 lb)
With Mounting Kits: 830 g (1.83 lb)
Dimensions: 220 x 220 x 48.1 mm (8.66 x 8.66 x 1.89")
Operating Temperature: -10 to 70° C (14 to 158° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC
Advanced Traffic Management
VLAN: 802.1Q
Advanced QoS: Per-User Rate Limiting
Guest Traffic Isolation: Supported
Wi-Fi Multimedia (WMM): Voice, Video, Best Effort and Background
Concurrent Clients: 500+
