802.11AC Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience.
MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement* overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.
4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
A 4x4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3x3 in both radio bands.
The UniFi nanoHD AP is the UniFi 802.11ac Wave 2 AP with the smallest form factor. Combining the performance increases from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi nanoHD AP delivers up to 125% greater performance than a typical Wave 1 AP.
Dimensions: 160 x 160 x 32.65 mm (6.30 x 6.30 x 1.29")
Weight: 300 g (10.6 oz)
Weight With Mounting Kits: 830 g (1.83 lb)
Networking Interface: (1) 10/100/1000 Ethernet Port
Power Method: 802.3af PoE
Power Supply: UniFi Switch (PoE)
Power Save: Supported
Beamforming: Supported
Maximum Power Consumption: 10.5W
Supported Voltage Range: 44 to 57VDC
TX Power:
2.4 GHz: 23 dBm
5 GHz: 26 dBm
MIMO
2.4 GHz: 2x2
5 GHz: 4x4
Radio rates
2.4 GHz: 300 Mbps
5 GHz: 1733 Mbps
Antennas
2.4 GHz: (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each
5 GHz: (2) Single-Port, Dual-Polarity Antennas, 3 dBi each
Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES),802.11w/PMF
BSSID: 8 per Radio
Mounting: Wall/Ceiling (Kits Included)
Operating Temperature: -10 to 70° C (14 to 158° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC
Advanced Traffic Management
VLAN: 802.1Q
Advanced QoS: Per-User Rate Limiting
Guest Traffic Isolation: Supported
WMM: Voice, Video, Best Effort, and Background
Concurrent Clients: 200+